A traditional trapezoidal sheet with sharp ribs — a robust solution for roofs and facades.
T-Profile is the classic trapezoidal sheet with sharply defined ribs, giving good rigidity and strength relative to its low weight.
The sheet is widely used for both roofing and facade cladding on garages, sheds, farm buildings, and industrial halls, where durability and simple installation matter most.
Advantages
- Sharply defined ribs give good rigidity relative to low weight
- A versatile solution for both roofing and facade cladding
- Suits garages, sheds, farm buildings, and industrial halls
- Simple, fast installation
- Up to a 60-year warranty against corrosion perforation
Specifications
- Material
- Galvanised steel
- Overall width
- approx. 1,173 mm
- Actual width of coverage
- 1,127 mm
- Sheet thickness (steel)
- 0.5–0.75 mm
- Sheet thickness (aluminium)
- 0.6 mm
- Profile height
- 16.5 mm
- Recommended length
- max. 12 m
Drawing
Colours
MAT-TK — 45-year warrantyFrom 117.88 DKK/m²
A classic polyester coating on hot-dip galvanised steel: the steel core is protected on both sides against corrosion, then finished with a primer and an organic polyester topcoat that gives the panel its colour, texture, and weather resistance. It is the most widely used coating system on the market — durable and cost-effective.
- Thickness
- 25 μm
- Corrosion class
- C3
- Perforation warranty
- 45 years
- Colour warranty
- 10 years
MAT PLUSS — 60-year warrantyFrom 128.63 DKK/m²
A coarse-grained, two-layer Pladur® Wrinkle Mat finish that meets fire class A2 and can be used in the higher C4 corrosion category (EN ISO 12944). The textured matte finish also hides minor surface waviness better than a smooth coating.
- Thickness
- 35 μm
- Corrosion class
- C4
- Perforation warranty
- 60 years
- Colour warranty
- 15 years